Satellite Meter
RF Parameters  
Input signal frequency 950MHz - 2150MHz
Input signal level -65dBm - 25dBm
LNB Service voltage 13v / 18v
LNB 22KHz Switch On / Off at 50% Duty cycle
Sat 3 Meter Parameters  
Regional settings 4 data sets
  - defaults to Sky for easy operation
  - All Sky transponders
  - UK multisat
  - 80cm system dish
Maximum data locations 120 per regional setting (i.e. 120
  transponders from any
  satellite combination
Satellite identification Only chosen satellite is found by
  unique identification softwear
Pre-programmed settings As required by local distributors
Reception standard DVB or DSS/DBS (selectable)
Modulation standard QPSK
Symbol rate 1-45Mbit/s
LNB Polarization voltage control 13v / 18v (Short circuit protection)
LNB 22KHz control On / Off (0.6VDC at 50% Duty cycle)
LCD Parameters  
Screen size 66.5mm x 25mm
No. Characters 64 (4x16)
Power Consuption  
Total power consumption 600mAh
Input voltage 12v DC
Available use from full charge 4 hours
Power adapter parameters  
Mains voltage 110-240V a.c.
Mains frequency 50 Hz
Output voltage 12V DC
Output current 1.25A
In-Vehicle charging 12V DC vehicle power adaptor
Charge time 10 hours to 90%
Operating conditions  
Operating temperature 0ºC - 80ºC
Relative humidity 10% - 90%
Atmospheric pressure 86Kpa - 106Kpa
Dimensions 213mm x 90mm x 57mm
Weight 660g